Worked just as described, make me not feel so bad drilling a hole in my boat. Very clean look when light is removed. I will defiantly recommend to others.
Problems mounting the Boat lite we have a solution. These special nuts are used to attach a Boat Lite to a boat where access below the deck isn't available. To install you set the light where you need it to mount and make the four holes. Next you drill the holes with a metal bit. Then you push the nuts into the holes and crush with the bolt supplied. Finally you will set the light in the location desired and bolt down the light securely. The package comes with the 4 supplied nuts needed for the boat lite to be mounted. These will work with the GEN 1/ GEN1.2/ GEN2 / GEN 3
I would recommend using a grade 8 bolt and jam nut for crushing the rivets and then use the supplied stainless bolts for securing the light. The stainless threads were just to soft when attempting to crush the rivet and actually damaged one of my rivets. I tapped the rivet and all was good!
Works great. Great way to install boat light